Drying characteristics: good drying performance, medium speed, slightly warping and cracking.
has strong nail grip and good paint adhesive performance. It is easy to saw and solve, and requires a lot of power. The jagged tooth becomes moderately blunt. Planing is not difficult, and the staggered parts affect processing. It is recommended to lower the cutting angle to 15 degrees, so the planing surface is smooth. The surface is smooth after sanding and polishing.
The wood is peach to reddish brown with purple stripes, and its material colors and patterns are beautiful. The texture is straight, the structure is thin and uniform, and the wood air-dry density is 0.8-0.96g/cm3. The material is dense, hard and heavy, has high strength and good toughness. The processing is not difficult, the car spin and planing are good, the cutting surface is smooth, and it has good gloss, and the coating and glue performance are good. Slightly wear-resistant and even termite hazards.
Sumu identification method
The wood is shiny and has straight or staggered textures. The structure is thin and uniform, the material is hard and heavy, the strength is high, the dryness is large, and the air-dry density is greater than 0.92g/cm3.
The outer skin falls off in a round shape, and after falling off, the oval shallow pit remains. The bark will cause red gel to flow out after injury. Heartwood reddish brown with purple stripes.
The ancient Yi Sumu has beautiful texture and hard wood, which is suitable for carving. It is suitable for house construction, durable materials, furniture, and floors. Because the wood has good corrosion resistance, it can be used in kitchens, bathrooms, etc. The board is wide and straight, with few scars, and has a high material yield, and is mostly used in Cantonese furniture. There are many single boards and single surfaces made of large cabinets or desks made of this material.
The difference between amulus and rosewood is that the new section of rosewood has fragrance, while the ancient Yi Sumu has no fragrance; the ancient Yi Sumu has obvious wave marks, but the ancient Yi Sumu has no wave marks. The wood rays are obvious on the string surface or near-string surface after the lacquer decoration, and the wood rays are also obvious on the string surface; the rosewood wood chip water extract has fluorescence, while the ancient Yi Sumu has no.
Sumu furniture is environmentally friendly and healthy, with high grade and good quality, and is increasingly loved by people. Then it is understood that most solid wood furniture users know very little about the maintenance of solid wood furniture. Protection and cleaning of surfaces Although solid wood furniture is durable, its paint surface is very easy to fade. To do this, the furniture must be waxed frequently. You can first use a wet rag dipped in some neutral detergent to gently wipe the surface of the furniture. When wiping, follow the texture of the wood. After cleaning, wipe it with a dry rag or sponge dipped in professional wood wax. When waxing, the center should be used as the origin, first around and then in the middle. However, it is best not to wax too frequently, as 1-2 times a year is best.
Indoor humidity
The indoor humidity of solid wood furniture must be slightly higher than its own moisture content, so consumers should understand the water content parameters of solid wood furniture when purchasing furniture, and refer to the use environment humidity marked on the instructions.
Temperature control
Solid wood furniture generally has poor heat resistance, so try to stay away from heat sources when using it. Generally speaking, try to avoid direct sunlight, because strong ultraviolet rays will cause the paint surface of solid wood furniture to fade; in addition, heating and lamps that can emit strong heat will also deform the solid wood furniture, so you should try to stay away; furthermore, do not put hotter water cups, teapots and other things on solid wood furniture in normal times, otherwise it will burn the solid wood furniture.